Soft Enamel Lapel Pins

A high quality lapel pin. This is the ideal production method for those designs that require a thinner surrounding metal rim. This allows for design coloring after outline cutting.

Plating: Gold / Antique gold / Silver / Antique Silver / Nickel / Black Nickel / Antique Nickel / Copper / Antique Copper / Brass / Antique Brass/Dyed Black

Custom soft enamel lapel pins
A very high quality lapel pin. Most often the metal used is copper. For budget considerations, iron material can be used instead of copper, but without polishing.

For Best Results:
- Bold designs are recommended to avoid coloring caused by lines and figures that are too thin or too small.
- Enamel coloring requires a surrounding metal space to ensure good quality painting. Therefore, it is necessary to allow for a blank metal rim (0.3mm minimum).
- The standard colors are based on the Pantone chart.


	Custom Lapel Pins: Soft Enamel - How they are made?
	Stampin Molding Molds the metal surface to form the design.
	Outline Cutting Cutting molds are made separately, then cut to the eact outline of the desing Outline cutting molds may be required depending on the complexity of the desing If a center hole or cu-out is required, an additional cut-through mold must be used
	Attachment Attachment is soldered onto the back of each piece
	Plating Plating now can be processed. The quality of plating varies with the lenght of time the metal is soaked in the plating liquid.
	Polishing The metal surface is then polished until it is smooth and shiny. This applies to copper metal only, Iton can be polished if required for it is not a standard procedure and you will incurr in an extra charge.
	Coloring The pin is colored by hand with soft enamel, one color at a time, using different sized syringes. Drying To precent defects, a high degree of skill is reuiqred in order to keep each color and the correct amount of enamel in the porper area.
	Cleaning Excess color and impurities are then wiped off the metal surfaces.
	Baking The metal piece is baked at approx. 450 F for 12 to 15 minutes.
	Epoxy Coating (if required) Clear epoxy is then applied to the surface to protect the enamel from color fading and cracking. Epoxy coating is optional and provided according to customer's requirements.
	Inspection & Packing All items are strictly inspected before delivery. Your satisfaction is guaranteed.
	go back to top

Soft Enamel Lapel Pins, Factory Direct Prices

	200	300	500	1000	2500	5000
1/2"	$1.55	$1.14	$0.85	$0.65	$0.50	$0.45
3/4"	$1.60	$1.20	$0.95	$0.75	$0.60	$0.50
1"	$1.75	$1.28	$1.00	$0.80	$0.65	$0.55
1-1/4"	$1.95	$1.45	$1.19	$0.95	$0.85	$0.70
1-1/2"	$2.25	$1.72	$1.45	$1.15	$0.99	$0.86

Compare soft enamel price with other pins


Copyright 1997 - 2004 Beverly Hills International, Inc. & www.mcaeiro.com PH. 888-799-2001 FAX 561-988-0083 Local 561-988-6998 Beverly Hills International, Inc. 1101 S. Rogers Circle, Suite 4 Boca Raton, FL 33487

Soft Enamel Lapel Pins

Custom soft enamel lapel pins A very high quality lapel pin. Most often the metal used is copper. For budget considerations, iron material can be used instead of copper, but without polishing.

Custom Lapel Pins: Soft Enamel - How they are made?

Soft Enamel Lapel Pins, Factory Direct Prices

Custom soft enamel lapel pins
A very high quality lapel pin. Most often the metal used is copper. For budget considerations, iron material can be used instead of copper, but without polishing.