Very high perceived value, specially with gold finish pins. In this two-tone pins the raised surfaces are polished and the recessed surfaces are rough (sandblasted). Available with iron metal.
Custom Diestruck lapel pins
A very high quality lapel pin with a high perceived value. Your artwork is stamped into copper or brass, and then finished with one of the many available platings.
Iron stamped lapel pins are also available.
For Best Results:
- We recommend that the recessed surface is always sandblasted, however if you required so we can polish it.
- For 3D items, please send the artwork with a frontal and a side ciew.
- No colors are used in this production process.
Custom Lapel Pins: Die Struck- How they are made?
Stamping Molding
Molds the metal surface to form the design
Outline Cutting
Cutting molds are made separately, then cut to the eact outline of the desing
Outline cutting molds may be required depending on the complexity of the desing
If a center hole or cu-out is required, an additional cut-through mold must be used
Attachment
Attachment is soldered onto the back of each piece
Plating
Plating now can be processed. The quality of plating varies with the lenght of time the metal is soaked in the plating liquid
Polishing
The metal surface is then polished until it is smooth and shiny. This applies to copper metal only, Iton can be polished if required for it is not a standard procedure and you will incurr in an extra charge.
Inspection & Packing
All items are strictly inspected before delivery. Your satisfaction is guaranteed.
